Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Indicator connectors  (Read 1197 times)

0 Members and 2 Guests are viewing this topic.

Offline Sir Rupert

  • Versys Member
  • **
  • Posts: 30
  • Country: gb
Indicator connectors
« on: May 26, 2018, 06:14:13 PM »
Tried to remove one of the fairing panels but couldn't work out how to disconnect the turn signal connector. There seems to be a 1cm cubical white plastic block with another much smaller block connected to it. I couldn't work out what to pull/squeeze/twist/push/etc to get it to come apart  :125:

A bit of advice would be very welcome.
No good deed goes unpunished.

Offline weljo2001

  • Versys God
  • *****
  • Posts: 1372
  • Bike: 2016 Versys 1000LT
  • City / Town: Norwalk,CA
  • Country: us
Re: Indicator connectors
« Reply #1 on: May 26, 2018, 07:52:38 PM »
First time i took the fairings off the bike i couldn't get those connectors un-done so i just let the side panels hang by the wires but had a chair under them to keep the pressure off the wires. The second time i had to use a tiny flathead screw driver to get the white connectors apart. Now i can just squeeze them where needed and they pop off...

P1010512 by weljo2001, on Flickr
I'm not a Gynecologist. "But I'll Take A Look"

Everyone has a plan 'till they get punched in the mouth...Mike Tyson

"Ya'll can go to hell, I'm goin' to Texas!"...Davey Crockett

Offline Sir Rupert

  • Versys Member
  • **
  • Posts: 30
  • Country: gb
Re: Indicator connectors
« Reply #2 on: May 26, 2018, 08:52:05 PM »
 :763:
But just where do you squeeze 'em?
No good deed goes unpunished.

Offline Bart

  • Versys Pro
  • ***
  • Posts: 401
  • City / Town: West Wales
  • Country: wales
Re: Indicator connectors
« Reply #3 on: May 26, 2018, 11:28:00 PM »
On the inside towards the back.
It is easier if you first remove the whole connector from the metal bracket by lifting the plastic tang and sliding forward. Once free you can rotate the connector to see where to press.

Offline weljo2001

  • Versys God
  • *****
  • Posts: 1372
  • Bike: 2016 Versys 1000LT
  • City / Town: Norwalk,CA
  • Country: us
Re: Indicator connectors
« Reply #4 on: May 26, 2018, 11:33:11 PM »
I'm not a Gynecologist. "But I'll Take A Look"

Everyone has a plan 'till they get punched in the mouth...Mike Tyson

"Ya'll can go to hell, I'm goin' to Texas!"...Davey Crockett

Offline peter73

  • Ex Member
  • Versys Master
  • *
  • Posts: 677
  • Account Terminated
  • Bike: Versys 1000 Mk2
  • City / Town: Sofia
  • Country: bg
Re: Indicator connectors
« Reply #5 on: May 27, 2018, 03:09:19 PM »
*Originally Posted by Bart [+]
On the inside towards the back.
It is easier if you first remove the whole connector from the metal bracket by lifting the plastic tang and sliding forward. Once free you can rotate the connector to see where to press.

This is exactly how I do it. Would have been much easier if the lock was facing outwards ... which gives me the idea to try putting the whole connector in reverse next time.
« Last Edit: May 27, 2018, 03:13:31 PM by peter73 »

Offline kotbaun

  • Versys Pro
  • ***
  • Posts: 99
  • Bike: klz1000lt 2016
  • City / Town: brooklyn
  • Country: us
Re: Indicator connectors
« Reply #6 on: June 04, 2018, 03:02:16 AM »
what is connectors for?

Online Vespista1960

  • Versys Master
  • ****
  • Posts: 569
  • Bike: Versys 1000 2015
  • City / Town: Milano
  • Country: it
Re: Indicator connectors
« Reply #7 on: June 04, 2018, 03:52:24 PM »
They are not connectors, but junctions points of the wiring.

Offline kotbaun

  • Versys Pro
  • ***
  • Posts: 99
  • Bike: klz1000lt 2016
  • City / Town: brooklyn
  • Country: us
Re: Indicator connectors
« Reply #8 on: June 04, 2018, 04:07:55 PM »
Looking fo connectors for external light

Online Vespista1960

  • Versys Master
  • ****
  • Posts: 569
  • Bike: Versys 1000 2015
  • City / Town: Milano
  • Country: it
Re: Indicator connectors
« Reply #9 on: June 04, 2018, 05:25:22 PM »
Over the horn, slightly on the right.

 



Recent Topics