Author Topic: Front setting to match Nitron Shock  (Read 262 times)

0 Members and 1 Guest are viewing this topic.

Offline Ditchburn12

  • Versys Pro
  • ***
  • Posts: 106
  • Bike: 2015KLZ H2 S2 MV KLV
  • City / Town: Cheshire
  • Country: gb
Front setting to match Nitron Shock
on: September 20, 2019, 01:38:16 PM
Has anyone had their stock front suspension set up to match a rear Nitron shock set for two up touring?
(carrying about 230Kg - 2015 bike)

If so I'd be really interested to know what your preload and compression settings are. Thanks

Offline Tiggadave

  • Versys Pro
  • ***
  • Posts: 62
  • Bike: 2016 Versys 1000
  • City / Town: Arborfield
  • Country: gb
Re: Front setting to match Nitron Shock
Reply #1 on: September 21, 2019, 07:46:02 PM
I dont have a Nitron shock, but I set the front suspension to maximum pre-load (no rings showing) and 1 click from max on damping when the bike is fully loaded.

These settings work well enough for me. I'm very tempted to get a Nitron shock though.

Cheers,

Dave.