Author Topic: Played around with RIDER mode on SE model  (Read 2133 times)

0 Members and 1 Guest are viewing this topic.

Offline 2tallrider

  • Versys Pro
  • ***
  • Posts: 75
  • Country: ca
Re: Played around with RIDER mode on SE model
Reply #20 on: October 17, 2020, 03:55:59 PM
*Originally Posted by TSloper [+]
Only the rear shock is affected by the electronic preload settings. Have you actually measured the bike height changes between the settings unloaded. I can feel the rear rise and fall when Iím standing up and cycling through the settings.
In Rider mode you can still set your Payload Mode. then you can also adjust the front and rear suspension separately. In the KECS Tab where it gives the option for hard, normal, or soft you can adjust the tension and compression for both front and rear from -5 to +5
Last Edit: October 17, 2020, 04:01:53 PM by 2tallrider