Author Topic: Panel Removal  (Read 287 times)

0 Members and 1 Guest are viewing this topic.

Offline supertino057

  • Versys Newbie
  • *
  • Posts: 4
  • Bike: Versys 1000 SE LT
  • City / Town: BR, LA
  • Country: us
Panel Removal
on: January 12, 2020, 07:03:25 PM
I'm trying to run an SAE line from the battery to the handlebar area. I don't have a shop manual yet and was wondering if there are any tips or tricks to removing this panel or prying it open slightly without breaking what are probably many small,hidden, pushpins and tabs. Thanks for any advice.
Tino


Offline Keener

  • Versys Master
  • ****
  • Posts: 875
  • Bike: 2015 Versys 1000
  • Country: ca
Re: Panel Removal
Reply #1 on: January 12, 2020, 08:00:48 PM
Search is your friend here ....lots of info on panel removal.....
Go to Search and type in Panel removal .... :7:

Online chucksklrst

  • Versys Pro
  • ***
  • Posts: 156
  • Bike: 2019 Versys 1K LT,SE
  • City / Town: Aurora, Colorado.
  • Country: us
Re: Panel Removal
Reply #2 on: January 12, 2020, 08:43:09 PM
It comes off real easy but first you need to remove the panel with the turn signal and corning light. That also come off easy. Then your panel will come off easy but there is one push pin in the very front underneath the panel that is not easy to see. I posted some pics of this a while back.





Last Edit: January 12, 2020, 08:53:49 PM by chucksklrst
Chuck Henderson, Aurora, Colorado
RIDE a little FASTER, RIDE a little FURTHER
https://www.facebook.com/chuck.henderson.980
14 FJR1300A (Ruby FeeJeR) 17 VX300 (Little Gray Bike)
19 Versys 1000 LT SE (Flying Nun)

Offline supertino057

  • Versys Newbie
  • *
  • Posts: 4
  • Bike: Versys 1000 SE LT
  • City / Town: BR, LA
  • Country: us
Re: Panel Removal
Reply #3 on: January 12, 2020, 09:38:38 PM
Thanks you. I was hoping that maybe that one little panel would come off... or... out separate from the others. Most of the bikes I have owned from Japan have sort of Rube Goldberg approach when it comes to plastic removal. I should have ordered a Service Manual when I picked it up. 

Cheers,
Tino

Online Jacovb

  • Versys Member
  • **
  • Posts: 15
  • Bike: 2019 SE GT
  • City / Town: Ede
  • Country: nl
Re: Panel Removal
Reply #4 on: January 14, 2020, 10:55:25 AM
You can also check your 'Instruction Manual'.
After the 'service interval' diagram there are some instructions to remove the panels (to acces the coolant and fuses)

Offline supertino057

  • Versys Newbie
  • *
  • Posts: 4
  • Bike: Versys 1000 SE LT
  • City / Town: BR, LA
  • Country: us
Re: Panel Removal
Reply #5 on: January 14, 2020, 04:50:45 PM
Thank You.


 


waggish