Recommendation for phone case to fit sat nav mount

[Funk man]

Hey folks, does anybody have any recommendations for the above. I'm looking for something so I can fit to the mount that came with a 2019 versys. I'm UK based.

Cheers

Funk

[Dolf]

I use the phone case in combination with the micro stem mount from SP Connect. Mounted on the over the clocks sat nav mount from SW Motech. Very satisfied with it.

[Funk man]

Cheers, but I have Xaomi phone, which they don't supply cases for

[bradr]

This is what I've been using: https://www.rammount.com/part/RAM-B-138-PD4U

I prefer it to the normal X-Grip as I feel its less likely to fall out.

[Scarecrow]

Originally Posted by bradr

This is what I've been using: https://www.rammount.com/part/RAM-B-138-PD4U

I prefer it to the normal X-Grip as I feel its less likely to fall out.

I think this is probably your best bet. You could use it in conjunction with the 2019 Sat- Nav mount. I bit expensive I know but your phone would be fairly secure

[bradr]

My apologies, but I just re-read the post and noticed that Kawasaki is now selling a Sat Nav mount for the bike which is what you were probably referring to.

The quick grip XL does require a RAM mounting system.  The exact model that I am using is here: https://www.rammount.com/part/RAM-B-149Z-PD4U and I have it come off the right hand side of the handle bar.

I have the base plate for the item in my original post and if you provide the measurements for the holes for mount I can measure the bolt holes on the base plate and see if it fits the base-plate in the original link.

Be warned, that putting stuff where the sat-nav is located kinda gets in the way when you go to turn on / off the bike and is low on the bike for a GPS imo.  I've mounted my GPS to the left bar and my cell phone to the right.

[190 Octane]

If you can find a mount that accepts the RAM Mount diamond style ball mount, it will fit the Kawasaki/SW Motech mount.

I'm not sure if this place will ship to you, but this is what I have, only for my LG phone.
https://www.slipgripcarmounts.com/SlipGrip-RAM-HOL-Holder-For-Xiaomi-MI-Max-3-Naked-Using-No-Case-On_p_222050.html

[markymark11]

I use Quadlock for all my phone needs - they have mirror mounts (which I prefer) handlebar, fork stem, Ram Ball - and all sorts of others. They do a universal plate that will fit any phone with a flat rear surface. Take a look through their web site it is brilliant quality and so easy to fit / remove and holds well.

[Funk man]

Thanks everyone for the help 👍

[NI-Jay]

Look up ultimate addons for phone cases and mounts. Very reasonable and well made.